Documentation · 3.8.1

The dashboard

See at a glance what the installation is doing: the animated house, widgets, balance, energy flow and history.

Documentation up to date with TedEnergy 3.8.1.

Overview

The dashboard is TedEnergy's home page. It answers three questions: what is happening now?, why? and what has it brought me today?

  • The status banner at the top shows the current mode and, in plain words, what regulation is doing and why (for example “the batteries are powering the house” or “charging with surplus solar”).
  • Widgets below are cards you choose and arrange as you like (see below).
  • Warning banners only appear when useful: new version available, license, electrical panel protection triggered, an inverter whose setpoint was changed by another system, etc.

The animated house

The main widget shows your installation live: solar production, house consumption, the exchange with the grid and the batteries, with the direction of energy. Depending on your installation, the charging station, heat pump, water heater or pool are drawn, as well as the plugged-in car and its charge level. The scene also follows the time of day and the forecast weather.

  • Click a label (solar, house, grid, batteries, equipment) to open its detail.
  • The small ring on the House block shows the share of consumption covered without the grid.
  • A barely active piece of equipment is not shown in the scene (threshold adjustable in the equipment's sheet); the Blocks view always shows everything.
  • A button switches between the House view and the plainer Blocks view. The Blocks view is used automatically if your device cannot draw 3D.

Widgets and their layout

The dashboard is made of widgets you can show, hide, move and resize: customisation button at the top of the page. Two layout modes exist, aligned (cards snap to a grid) and free. The layout is shared by the whole installation: the Android app also uses it if you enable synchronisation.

A library, with previews, lets you add widgets that are not shown by default. Available widgets:

  • Live energy flow: the animated house.
  • Right now: setpoint sent, inverters in use, meter target, next scheduled charge.
  • Today's balance and The last days (7 or 30): where the consumed energy came from.
  • Where the energy goes: the flow diagram between solar, batteries, house and grid.
  • Detailed history and Today's figures.
  • Savings: what solar and batteries saved you from buying.
  • Next tariff period: when the electricity price changes.
  • Solar: forecast and actual: the weather-based production forecast, day by day, compared with reality.
  • Battery health, Battery energy (kWh stored, usable, room left), Battery autonomy (how long they will last) and Batteries full at… (estimated end of charge).
  • Consumption hours, Who consumes (by equipment), Consumption peak (with its time).
  • Panel load: the electrical panel's load against its limit, if panel protection is active.
  • Value of your choice: any TedEnergy measurement, shown large.

Widgets that command something (charge the car, pause…) stay in the full interface; they are not part of the phone widgets.

The balance for the day and the last days

The balance shows where the energy consumed by the house came from: direct solar, batteries, grid. The grid is broken down by tariff period (peak, off-peak, Tempo colours…) if your subscription is set up (see Tariffs, balance and reports).

  • The kWh / € button shows the same breakdown in energy or in euros.
  • The Last days chart covers 7 or 30 days. Click a column, or use the ‹ › arrows, to see another day's balance; the Today button goes back to the current day.
  • The day's consumption peak is shown with its time.
  • With resale set up, the balance also shows the energy exported and the income, and the net bill.

Where the energy goes

This diagram links sources (solar, grid, batteries) to uses (house, batteries, export) with bands that are wider the more energy there is. You choose the period: one day on the calendar, 6 h, 24 h, 7 days or 30 days. Today updates live. The data can be exported as a CSV file.

The detailed history

  • Click-and-drag to zoom on a period; below two hours, every measurement is shown.
  • The background colours show the operating mode at each moment.
  • In three-phase, one curve per phase shows which one consumes the most.
  • The average battery level, setpoint, solar, house and meter can be shown or hidden.

The solar forecast

If the weather forecast is enabled (Settings › Weather forecast), TedEnergy estimates your panels' production for the coming days. This estimate improves by itself by comparing its forecasts with your installation's actual production. The Solar: forecast and actual widget shows the gap, the expected peak and the forecast's reliability; the history window lets you look back at past days.

The forecast is an estimate, never a guarantee. It can also be used in automations and in the Store (night charging according to the weather, reserve before a storm).

Frequently asked questions

Why does the dashboard show a small discharge while charging?

With optimised charging, two inverters work in opposite directions at low power to absorb variations. You therefore see a small discharge while the whole charges. This is intended: see How TedEnergy regulates.

Values no longer update.

Check the connection badge in the top bar and the Diagnostic page. If an inverter's measurements stop arriving, it is flagged “measurements not received” on its sheet. See Troubleshooting and glossary.

Can I get the dashboard on my phone?

Yes: the Android app shows the animated house and the widgets, at home and remotely.

A question, a special case? The community answers on Discord and Facebook. An AI can also analyse your installation: see “Tune with an AI” in TedEnergy's Settings. Discord · Facebook

Ready to make all your batteries work together?

Free download: your free license arrives as soon as your email address is confirmed, no credit card required.

Download for free